1. Do you have an old account but can't access it?


    See Accessing your GIRS Account or Contact Us - We are here to help!
    Dismiss Notice

Reef safe sillicon

Discussion in 'General Discussion' started by bearsareawsome, Apr 29, 2012.

  1. bearsareawsome

    bearsareawsome Well-Known ReefKeeper


    GE Silicone
    II Window & Door Clear caulk 9.8 oz
    is this the right stuff?  or what exactly do i need to buy from mernards/home depot?


    Thanks for the help.  i know this has been answered before.
     
  2. moneypit

    moneypit Inactive User

    RTV108, pure silicone, or the silicone with *NO* mold/mildew resistant additives, i.e. GE1 if that's all that's available.
     
  3. blackx-runner

    blackx-runner Administrator Website Team Leadership Team

    I stick with marineland aquarium silicone. No questions about whether or not its the right stuff. Says so right on the container.
     
  4. Big John

    Big John Inactive User

    Go to Menards, back by the paint dept there is Loctite Clear Silicone Waterproof Sealant--Aquarium Safe, it's a 2.7oz tube, runs about $3.50 a tube.
    I've used this for years, All Glass or Marineland silicone is not cheap!
    Good luck, hope this helps!
    John
     
  5. bearsareawsome

    bearsareawsome Well-Known ReefKeeper

    Sweet thanks i will go buy a couple tubes. do you suggest silliconing bulk heads in?
     
  6. Big John

    Big John Inactive User

    You really shouldn't have to use silicone on your bulkheads, just make sure the rubber gasket is on the wet side.
     
  7. kyro

    kyro Inactive User

    The reason all glass and marineland silicone is so expensive is because it cost money to relable other companies like GEs products
     
  8. bearsareawsome

    bearsareawsome Well-Known ReefKeeper

    I understand you get what you pay for but when it comes to just putting baffles in im not real worried about having the best quality. If i was building a tank i would prolly pay for the better stuff.
     
  9. blackx-runner

    blackx-runner Administrator Website Team Leadership Team

    Not really getting what you pay for, because like stated it is just the label. As long as you are sure that the silicone you are buying is aquarium safe it will be fine. But for me it was taking the guess work out of buying the correct stuff that will not kill my tank. There is a lot of threads with mixed answers about what silicone is and isn't safe. I was sick of the confusion so I went with the marineland.
     
  10. Jamie

    Jamie Well-Known ReefKeeper Vendor

    I used the black RV silicon found in the Rv department from walmart to silicon the overflow to the wall in my 350.
    6 months later and I have 26 species of SPS thriving in the tank now, so I would say it's safe.
     
  11. Bud

    Bud Loves Bacon Website Team Board of Directors Leadership Team GIRS Member Vendor

    This is an age-old debate. People have had problems with various type of silicone. Mostly it is attributed to using silicone with mold inhibitors, but occasionally not. The key here is cure time. You really need to let silicone cure for 2 full weeks before putting water in the tank. 72 hours to fill test only.

    As for the product, all the pros use RTV 108 and you can get that at Grainger in DSM for less than $10 and I guarantee you that is reef safe. You can also get black which is I believe RTV103 from Grainger. Save yourself the question and get RTV and let it fully cure. you hear a lot of 'this worked for me' but stick with what everyone agrees on. RTV and 2 weeks.
     
  12. Jamie

    Jamie Well-Known ReefKeeper Vendor



    Thats the exact same stuff that I used you can get it on ebay here
    Black RTV Silicone
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice