1. Do you have an old account but can't access it?


    See Accessing your GIRS Account or Contact Us - We are here to help!

mag 12

Discussion in 'General Discussion' started by Guest, Oct 21, 2011.

  1. Guest

    Guest Guest

    Ratings:
    +0 / 0 / -0
    will a mag 12 be a good return pump for a 90 gallon reef? or is that pump to small? thanks
     
  2. ThyRaven

    ThyRaven Well-Known ReefKeeper

    919
    Ratings:
    +1 / 0 / -0
    What is the distance from the sump to the return point on the 90? If you are less than 6 foot yes but over that it starts to get iffy.
     
  3. AJ

    AJ Inactive User

    Ratings:
    +0 / 0 / -0
    A Mag 9.5 is plenty on a 90 gallon reef, even at 6 foot of head. Check this out: http://www.marinedepot.com/powerheads_pumps_danner_mag_drive_supreme-ap.html

    At 6 foot of head, a Mag 9.5 delivers 720 GPH (an Aqueon reef ready 90 gallon tank's overflow is rated at 600 GPH I think). At 6 foot, a Mag 12 delivers 950 GPH. You could easily T off your return line and use the same pump to run a reactor or two and still be OK using a Mag 12 on a 90 gallon tank.

    --AJ
     
  4. ninjazx777 Experienced Reefkeeper

    Des Moines, IA
    Ratings:
    +7 / 1 / -0
    +1 Aj a mag12 is way overkill i use a mag5 for a return on my 75gal and i have it throttled back some
     
  5. ninjazx777 Experienced Reefkeeper

    Des Moines, IA
    Ratings:
    +7 / 1 / -0
    +1 Aj a mag12 is way overkill i use a mag5 for a return on my 75gal and i have it throttled back some
     
  6. Nik Experienced Reefkeeper

    Windsor Heights
    Ratings:
    +13 / 0 / -0
    Ha! Amature! I use a MAG 18 AND a MAg12 on mine. I should say that I have my sump in the basemrnt and my Tank above it on the first floor. Oh and it is a 135G. LOL.
     
  7. Guest

    Guest Guest

    Ratings:
    +0 / 0 / -0
    going to plump it in today with all the other goodies i got thanks
     
  8. mthomp

    mthomp Inactive User

    Ratings:
    +0 / 0 / -0
    I use a 9.5 on my 90 with the sump directly below the DT and it is throttled down a little.
     
  9. Guest

    Guest Guest

    Ratings:
    +0 / 0 / -0
    got mag 12 hooked up flow great
     
  10. Bud Loves Bacon Website Team Board of Directors Leadership Team GIRS Member Vendor

    West Des Moines, IA
    Ratings:
    +1,823 / 14 / -0
    Those pump curves for the Mag 12 and 18 are all based on using 1.5" ID return. I was running a 12 with 4.5' head and 3/4" hose and was getting 400 GPH. upped it to 1.25" (still had to go through 3/4" bulkhead) and maxed out at about 780 GPH.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.