1. Do you have an old account but can't access it?


    See Accessing your GIRS Account or Contact Us - We are here to help!
    Dismiss Notice

Issues with Koralias not working

Discussion in 'General Discussion' started by jnjsad, Sep 6, 2012.

  1. jnjsad

    jnjsad Inactive User


    I have virtually given up on these pumps. I have 4 of them. 1 nano - no probs. Bought a 750 works sporadicaly with no logical sequence of when it wants to function or not. Bought 2 larger evolution pumps from fellow club member - same thing. I gave vinegar bath and same issue. Was using the 750 the other day (it was working)....had it running for about 3 days. Go to take it out of one tank and place in another - unplug...wait a bit....take out....put in new tank...plug in....nothing. There is a slight vibration/hum indicating the pump wants to work....but nothing else. Unplug, inspect, propeller appears to spin freely...assemble again - doesn't want to spin. Try placing gaurd on different ways, same result. I am using these for straight ciculation - no wave makers and not turning on/off frequently. I have over $100 worth of pumps laying on the floor....ready for the hammer. Any advice for a frustrated reefer?
     
  2. bearsareawsome

    bearsareawsome Well-Known ReefKeeper

    Nope having the same exact problem
     
  3. saltwaternewbee

    saltwaternewbee Inactive User

    Had the same problem with the old style but so far none with the new.
     
  4. Travis G

    Travis G Experienced Reefkeeper

    I have the same problem constantly... i stick a pen in the front and touch the impeller. Starts spinning
     
  5. MXC207

    MXC207 Well-Known ReefKeeper

    I always have to stick my fingers in them to get them spinning as well. Switching to vortechs.
     
  6. Bunzy

    Bunzy

    i would try replacing the impellers i have one that the magnets or coil whichever is in the impeller got a little split in it and needs a kick start and my other one likes to start up backwards sometimes i think it is in the impeller might be better than smashing them not sure
     
  7. Alex McG

    Alex McG

    Same issue on my old ones, won't start or runs in reverse. I got a new one a couple of weeks ago and it doesn't have these problems... so far.
     
  8. areefoffaith

    areefoffaith Inactive User

    so what pumps are reliable choices? in that price range?
     
  9. jnjsad

    jnjsad Inactive User


    Well...so far I am 1 for 3 with getting these pumps to work. The 'stick the pen inside' method seemed to work for one...although not so much for the other 2. Not sure what to do with the other 2....hang on to them...or toss them. Such a waste.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice