Apex Firmware Release - 4.05 4B11

I'm a few days late on this, but Neptune has just released a new firmware update for the Apex controller.  I've applied it to my Apex and had no issues doing so.  The new release added feed timer configuration into the web interface as well as web based reboot capabilities.  There's also another 16 profiles available.  Here's the notes on the release history so you can see what new features/fixes.
Apex 4.05 3/10/11 Release 4B11
- added Aqua Illumination Sol Blue support to the VDM.
- Increased number of profiles to 32.
- Added additional network setup configuration options.
- miscellaneous bug fixes.
Apex 4.04 9/20/10 Release CA10
- Support for VDM module
- Support for EB4 module
- Enhanced graphing with support for multiple probes and outlets.
- probe naming and configuration from web browser
- Added weather profile type.
- Apex Display initialization bug fixed.
- Daylight savings time datalog/graphing bug fixed
- miscellaneous bug fixes.
Apex 4.03 7/28/10 Release 7B10
- Support for PM3 Module
- Support for WXM Module
- Enhanced power failure support for Apex base module (see system->Misc setup menu)
- Fixed DST clock web page bug.
- Fixed outlet initialization bug when clock auto updates.
- Fixed EB8 power failure detection
- Firmware update of Apex Display to fix firmware corruption issue
- Fixed bug associated with longer probe names.
- Added some telnet diagnostic commands used for technical support
- Fixed very infrequent probe configuration bug on PMx.
- Increase smtp timeout
Apex 4.02 2/16/10 Release 2H10
- Support for PM2 Module
- Preliminary support for Vortech module
- Initial graph page displays last 24 hours.
- Customizable web status page.
- Configuration Load/Save
- Enhanced clock features.  Day light savings time added, NTP internet clock set support
Apex 4.01 11/04/09 Release BA09
   
- xml fix for illegal probe name characters
- multi-day graphing and datalogging on web pages.
- support for multi-day xml datalogs and output logs
   i.e.: http://apex/cgi-bin/outlog.xml?sdate=091011&days=30
      http://apex/cgi-bin/datalog.xml?sdate=091011&days=30&interval=60
   sdate = start date, MMYYDDHHMM
   days = number of days to download
   interval = specifies the number of minutes between samples to output (only valid for datalogs)
- made all probe names consistent between all xml and status pages.
- support Apex Lite
- support PM1
- added defer command to filter/remove short lived changes in probe values.
   i.e. Defer 010 Then On
Apex 4.00 8/29/09 Release 8J09
     - Improved accuracy of EB8 current logging
     - Added popup window for the module firmware update status
     - Fixed AM/PM clock bug
     - enhanced EB8 power failure functionality.
     - fixed misc. web page errors.
Apex 4.00 8/11/09 Release 8H09
     - fix output status display selection bug
     - fixed email bug
Apex 4.00 8/3/09 Release 8C09
     - Added EB8 support for lunar cycle dim command - on/off only   
     - Optimized HTML web pages
     - Optimized HTTP web server
     - Fixed seasonal table bug for March
     - Fixed 'If Power Apex Off' bug
     - Fixed Feed Delay bug
     - Enhanced module and outlet deletion
Initial 4.0 release

 

Also, for what it's worth, here's the current firmware version for some of the various components:
PM1 - 009
PM2 -
PM3 -
VDM -
WXM - 004
EB4 -
EB8 - 009
Display - 009
I was only able to list the current version for the components that I have which is why half of the modules don't have a version indicated.  If you have other components than those listed with version numbers, you should push the firmware to them (Configuration / Module Setup / Select the module you wish to push firmware to / Select Update Firmware option / Click Submit Module Change button). 
--AJ