Everything is now sold. Thanks!
All of Coral and Fish have been sold / spoken at this point. Here is what I still have: 50ish lbs of live rock $2 per pound 25ish lbs of live...
Here is what's still available that needs to be sold before I can start selling equipment: Frogspawn a couple Small Frags with just 3-5 heads $10...
I've had a few interested parties that wanted to buy the whole setup but they seem to have fallen through. I am willing to start parting stuff...
I am getting out of the hobby after 10 successful years. Selling my 75 Gallon reef setup for $400. Would prefer not to part it out, but I will...
PM Sent
RyanShall is right, a 1" bulkhead requires a 1 3/4" hole. The bit that I have is 45mm....
Yes, it is a diamond tip bit. It is one of the cheapo ones that you can get on E-bay from Korea. If you want to buy it off me that's fine, since...
I have a drill bit for putting in 1 inch bulkheads that I have never used. I can't remember how many millimeters it is, but I know it's for a 1"...
Speaking of which, how are the Nudibranche's doing for the people that got in on that group order a couple of months back? Anybody to the point...
Nevermind I found it on your other post.
Where are the aneorobic bactieria that break down the fish waste going to live? Without live rock or bio-balls or a foam filter or something...
Sure, just let me know.
I can give you a couple handfuls. I am on the SW Side.
I only have one regular pump in my system, and that is my return pump. It's a Mag 9. I don't really have experience with any other pumps, but...
Rio pumps have a reputation for running hot, leaching electricity, and having high failure rates. If you are using them without any of these...
You can silicon a peice of glass in to serperate your skimmer section from your refugium. You will need your overflow to drain into your skimmer...
I had a WON Brothers Titinium Heater for about a year before it failed off. I guess that's better than failing on, but I was still dissapointed...
I have one in CR you are welcome to use. I am pretty sure it is a 45mm. It's one of the Hong Kong Bits, and I've only used it to drill one test...
I would use 1/4" it should be pretty cheap and easy to come by. Anything smaller and I'd worry about breaking it while working in the sump.
Separate names with a comma.
